Weatherproof Silicone Sealant N60

Decoration Adhesive

Project Use Adhesive

Other Adhesive

WD-40

PU Foam Silicone Sealant Epoxy Sealant Tile Adhesive Liquid Nails

Weatherproof Silicone Sealant N60

Product Features：

Curtain Wall Silicone Sealant is a one part, neutral cure, high performance weather seal silicone sealant which exhibits outstanding physical properties for curtain wall sealing and general building constructions applications. It also has very good UV and weather resistant, superior adhesion to a wide range of surfaces, resulting in a lasting finish. It has a 25 years guarantee against crumbling, cracking or drying.

Consultation Purchase

Product Videos

Brochure

Product Details

1. PRODUCT FEATURE OF WEATHERPROOF SILICONE SEALANT N60

l One part, can be easily used and extruded with common caulking guns.

l Excellent adhesion to most construction materials without the primmer.

l Outstanding weatherproofing ability, resisting to ultraviolet ray (UV), ozone, snow or temperature extremes.

l Neutral cure, non-acidic, will not corrode metal or other corrosion-sensitive material.

2. TYPICAL PROPERTIES OF WEATHERPROOF SILICONE SEALANT N60

Test Parameter		Unit	Result Translucent Pigmented
As Supplied Tested at 23℃ and 50% RH
Specific Gravity	g/ml		1.00±0.02	1.32±0.02
Flow (sag or slump)	mm		0	0
Extrusion Rate Skin Time	ml/minute minute		100 5~10	123 ≤80
Tack-free Time	hour		≤1	≤8
Curing time (5mm)	hour		≤12	≤15
As Cured-after 21 days at 23℃ and 50% RH
Durometer Hardness, Shore A		Points	28	36
Elastic Recovery		%	98	98
Movement Capability		%	±25	±40
Tensile/Modulus at 50% Elongation		Mpa	0.27	0.52
Tensile/Modulus at 100% Elongation		Mpa	0.35	0.68
Ultimate Tensile Strength Ultimate Elongation at Break		Mpa %	0.37 175	0.84 400

3. APPLICATIONS AREAS OF WEATHERPROOF SILICONE SEALANT N60

l Aluminum composite panels cladding, aluminum and glass curtain walls.

l General glazing and weather sealing in curtain walls and building facades.

l Windows & doors perimeter joints. e.g. Vinyl windows, aluminum windows, PVC, UPVC windows…etc.

l Glass, aluminum, ceramics, metals, steel, fiberglass, most plastics, tiles, bricks, marble & granite surfaces and so on.

4. APPLICATION INSTRUCTIONS OF WEATHERPROOF SILICONE SEALANT N60

--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.

--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.

--Place the cartridge into a caulking gun.

--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.

--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.

5. STORAGE AND SHELF LIFE OF WEATHERPROOF SILICONE SEALANT N60

12 months from manufacture date when store in cool dry locations below 25℃, keep away from heat source and direct sunlight during storage.

6. PRODUCT QUALIFICATION

7. SHIPPING AND SERVING OF WEATHERPROOF SILICONE SEALANT N60

Packing: 220ml to 300ml of cartridge, 590ml 600ml of sausage, 190L of drum. 24 ctgs/ctn of cartridge, 20 pcs/ctn of sausage. (For special specifications, please contact us.)

Shipping: Sea, air or land transportation

Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.

8. FAQ

Q: What’s the impact of silicone sealant with bubble?

A. No bubble on the silicone sealant surface is a common performance for a good quality PU foam; if the silicone sealant has bubble, the silicone rubber is easy to break after curing.

Q: Except for silicone sealant, what other products you can provide us together?

A: We also produce the PU Foam, MS Sealant, Marble Glue, Two-component epoxy adhesive, Two-component insulating foam.