Aquarium Silicone Sealant N95

Decoration Adhesive

Project Use Adhesive

Other Adhesive

WD-40

PU Foam Silicone Sealant Epoxy Sealant Tile Adhesive Liquid Nails

Aquarium Silicone Sealant N95

Product Features：

Aquarium Silicone Sealant N95 is a single-component, acetic cure, professional quality for aquarium, food grade, and also it can be used for general glass, brick, ceramics, anodized aluminum and wood etc. most construction materials. It has very good weathering resistance, durability, sealing and bonding properties.

Consultation Purchase

Product Videos

Brochure

Product Details

.PRODUCT FEATURE OF AQUARIUM SILICONE SEALANT N95

l Easy to use – one part sealant, no mixing required.

l Cures at room temperature when exposed to moisture in the air.

l Stable and flexible from -60℃ to +80℃ with short peak up to +205℃.

l Suitable for all kinds of glazing applications.

l Outstanding weatherproofing ability, resisting to ultraviolet ray, ozone, snow, or temperature extremes.

2.PRODUCT PARAMETER (SPECIFICATION) OF AQUARIUM SILICONE SEALANT N95

Test Parameter	Unit	Result
As Supplied Tested at 23℃ and 50% RH
Specific Gravity	g/ml	1.00±0.02
Flow (sag or slump)	mm	0
Extrusion Rate Skin Time	ml/minute minute	100 5~10
Tack-free Time	hour	≤1.5
Curing time (5mm)	hour	≤8
As Cured-after 21 days at 23℃ and 50% RH
Durometer Hardness, Shore A	Points	33
Movement Capability	%	±25
Tensile/Modulus at 50% Elongation	Mpa	0.36
Tensile/Modulus at 100% Elongation	Mpa	0.48
Ultimate Tensile Strength Ultimate Elongation at Break	Mpa %	0.54 320

1. APPLICATION OF AQUARIUM SILICONE SEALANT N95

--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.

--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.

--Place the cartridge into a caulking gun.

--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.

--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.

STORAGE AND SHELF LIFE of AQUARIUM SILICONE SEALANT N95:

12 months from manufacture date when store in cool dry locations below 25℃, keep away from heat source and direct sunlight during storage.

5.PRODUCT QUALIFICATION

6. PACKING, SHIPPING AND SERVING OF AQUARIUM SILICONE SEALANT N95

Packing: 220ml to 300ml of cartridge, 590ml 600ml of sausage, 190L of drum. 24 ctgs/ctn of cartridge, 20 pcs/ctn of sausage. (For special specifications, please contact us.)

Shipping: Sea, air or land transportation

Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.

7.FAQ

Q: What’s the reason that after used Neutral silicone sealant, there are some bubble on the surface?

A: When use the silicone sealant into the gap, the gap is damp, after the sunlight contact, it will make the steam effect the un-cured silicone sealant. That’s the reason why there are some bubble on the silicone surface.

Q: Except for silicone sealant, what other products you can provide us together?

A: We also produce the PU Foam, MS Sealant, Marble Glue, Two-component epoxy adhesive, Two-component insulating foam.