Glass & Metal Silicone Sealant S88
Product Features：Glass & Metal Silicone Sealant S88 is a one part neutral cure construction grade silicone sealant that easily extruded in any weather. It cures at room temperature with moisture in the air to produce a durable, flexible silicone rubber seal.
GLASS & METAL SILICONE SEALANT S88
1. PRODUCT FEATURE OF GLASS & METAL SILICONE SEALANT S88
l One part, it can be easily used and extruded with common caulking guns.
l Excellent adhesion to most construction materials without the primmer.
l Outstanding weatherproofing ability, resisting to ultraviolet ray, ozone, snow or temperature extremes.
l Neutral cure, non-acidic, will not corrode metal or other corrosion-sensitive material.
2. PRODUCT PARAMETER (SPECIFICATION) OF GLASS & METAL SILICONE SEALANT S88
|
Test Parameter |
Unit |
Result Translucent Pigmented |
|
|
As Supplied Tested at 23℃ and 50% RH |
|||
|
Specific Gravity |
g/ml |
0.98±0.02 |
1.46±0.02 |
|
Flow (sag or slump) |
mm |
0 |
0 |
|
Extrusion Rate Skin Time |
ml/minute minute |
180 5~10 |
102 ≤60 |
|
Tack-free Time |
hour |
≤1 |
≤5 |
|
Curing time (5mm) |
hour |
≤12 |
≤16 |
|
As Cured-after 21 days at 23℃ and 50% RH |
|||
|
Durometer Hardness, Shore A |
Points |
26 |
42 |
|
Elastic Recovery |
% |
95 |
94 |
|
Movement Capability |
% |
±25 |
±20 |
|
Tensile/Modulus at 50% Elongation |
Mpa |
0.27 |
0.51 |
|
Tensile/Modulus at 100% Elongation |
Mpa |
0.34 |
0.60 |
|
Ultimate Tensile Strength Ultimate Elongation at Break |
Mpa % |
0.36 220 |
0.68 420 |
3. APPLICATION AREAS OF GLASS & METAL SILICONE SEALANT S88
l General glazing and weather sealing in curtain wall and building facades.
l EIFS, the non-structural curtain walls and building construction applications.
l Window e.g.: vinyl windows, doors and perimeter joints.
l Surface like glass, aluminium, ceramics, metals, steel, fiberglass, most plastics, tiles, bricks, marble & granite and so on.
4. APPLICATION OF GLASS & METAL SILICONE SEALANT S88
--Thoroughly clean and dry surface from oil, dirt and grease. Allow to dry completely before applying silicone.
--Cut the seal at the top of the cartridge and cut the nozzle at a 45° angle, to the size of the gap opening. Screw the nozzle to the top of the cartridge.
--Place the cartridge into a caulking gun.
--Hold the caulking gun at a 45° angle. Press the nozzle opening against the joint, apply steady pressure to the caulking gun and extrude the silicone sealant forcing the sealant into the gap and move in a pushing motion, along the joint in one smooth action.
--Sealant will cure fully in 48 hours. As this point any unwanted sealant can be removed by trimming with a sharp blade, but avoid under cutting the seal.
5. STORAGE AND SHELF LIFE OF GLASS & METAL SILICONE SEALANT S88
12 months from manufacture date when store in cool dry locations below 25℃, keep away from heat source and direct sunlight during storage.
6. PRODUCT QUALIFICATION
7. PACKING, SHIPPING AND SERVING OF GLASS & METAL SILICONE SEALANT S88
Packing: 220ml to 300ml of cartridge, 590ml 600ml of sausage, 190L of drum. 24 ctgs/ctn of cartridge, 20 pcs/ctn of sausage. (For special specifications, please contact us.)
Shipping: Sea, air or land transportation
Serving: We provide free design service, and you’ll get excellent after-sales service, we committed to solving any problems that may occur when you use our products.
8. FAQ
Q: What’s the difference between Neutral silicone sealant and Acetic silicone sealant?
A: Neutral silicone sealant can be used both indoor or outdoor, but acetic silicone sealant just can be used in indoor.
Q: Are you a factory?
A: Yes, we have the professional production and QC team with 18 years production and research and development experiences.From raw materials to final products, strict QA and QC are always on field to guarantee the reliability of the products.
tel：400-1866-616
address：112 Fuyuan Road, chagugang Town, Wuqing District, Tianjin
fax：022-82967400
Consultation Purchase